tag-connect

An alternative PCB pawprint for the Tag-Connect TC2030 pogo pin programming cable

20 pin SWD/JTAG J-Link to 10 pin (0.1" and 0.05") reconfigurable Cortex-M header with power supply and TagConnect compatibility, as well as with a reset button. (Info about about J-Link Commander and Segger RTT is also given.)

A tool to generate 3D printable pogo pin jigs with OpenSCAD

USB-UART-BRIDGE & ESP programmer featuring tag-connect

Adapter PCB from the STDC14 debug connector (STLINK-V3) to a Tag-Connect TC2030-IDC cable (KiCad).

A modification of the STLINKV3 debugger

Open-hardware KiCad adapter: ST-LINK V3 (STLINK-V3SET MB1440 CN2) / ARM 20-pin JTAG/SWD to Tag-Connect TC2030-IDC. Gerbers, BOM, AliExpress parts.

Open-hardware KiCad adapter: Renesas E2 emulator Lite (20-pin 1.27 mm, RA/SWD) to Tag-Connect TC2030-IDC. Hand-solderable, Gerbers, BOM, AliExpress parts.