Go to English instructions | 前往中文說明
This program allows you to specify the local host address, which means you can designate a specific network interface when multiple network cards are active. This prevents the program from attempting connections based on the system's default network interface order.
The drawback is that the program does not automatically select a network interface, but this is its intended purpose: to test if a specific network interface is working properly without disconnecting other networks.
How to Use:
- The input field at the top has two parts: the left side is for the local host address, and the right side is for the destination address. (You can directly enter an IP address or a domain name; the program will attempt to resolve the IP automatically.)
- Press [Start] to begin. You can stop the process at any time by pressing [Stop].
The [Select] button in the top-left corner is for quick network interface selection. It automatically fills in the corresponding local address and router address, allowing you to easily choose a network to test the connection between your local device and the router.
本程式可以指定本地主機的位址，這表示若有多個網路介面卡正在運作時您可以指定網路介面，而不是依照系統的網路介面順序嘗試是否能連接。 缺點是，本程式不會自動選擇網路介面，但這也是本程式本來的用途，在不斷開其他網路的情況下測試特定的網路介面是否通暢。
使用方式：
- 最上方位址輸入欄左方為本機位址，右方為目標位址(直接輸入IP 或 輸入網域名稱，程式會嘗試自動查詢 IP)。
- 按下 [開始]，您可隨時停止只需按下 [停止] 即可。
左上 [選取] 為快速的網路介面選擇，能自動填入相對應的本機與對應的網路分享器位址，您可以便利的選擇網路以測試您的本機端與網路分享器端是否暢通。