Wireless tethering for the Sony A7 III on macOS. Shoot with the camera as usual and every photo appears on your Mac about a second later. When you're done, bring the full-size RAW and JPEG files across over Wi-Fi, already paired with their previews.
No cables while shooting, no Sony software, and no Imaging Edge account.
Shutterdrop currently supports the Sony A7 III (ILCE-7M3) only, tested with firmware 4.04. Other Sony bodies may work but haven't been tried.
The A7 III has no Wi-Fi tethering to a computer, and Sony's Camera Remote SDK doesn't support it. Shutterdrop combines two Wi-Fi modes the camera does have:
| While shooting | Afterwards |
|---|---|
| Camera on Ctrl w/ Smartphone. Each shot appears on the Mac ~1 s after you press the shutter, as a 1616×1080 preview. | Camera on Send to Computer. Shutterdrop copies the full-size ARW and/or JPEG files over your home Wi-Fi and pairs each with its preview. |
Need the full-size files during the shoot? Full-size USB tethering is the next feature planned.
- Live previews of every shot, taken with the camera's own shutter button.
- Full-size import over Wi-Fi:
- Pick the photos to copy from a list with thumbnails.
- Choose RAW + JPEG, RAW only or JPEG only.
- See progress throughout; a cancelled or interrupted import carries on where it stopped.
- Automatic matching of each preview with its full-size files.
- One-click camera pairing over USB, needed once for Send to Computer.
- Library you control: choose where photos go. Shutterdrop keeps a
Shutterdropfolder there, one folder per day. - Browse by day with a large preview. Open files or show them in Finder.
- Delete photos, a selection or a whole day (to the Trash).
- Fix wrong camera clocks: shift a photo, a selection or a day to the right date.
- A command-line tool (
sdprobe) for the same flow, plus camera probing.
- A Mac with macOS 26 or later
- Xcode 26 or later (Swift 6.2), to build it. Tested with Xcode 27.1.
- A Sony A7 III and a USB cable (used once, for pairing)
- A home 2.4 GHz Wi-Fi network. The A7 III doesn't use 5 GHz.
git clone https://github.com/kushagra21/shutterdrop.git
cd shutterdrop
scripts/build-app.sh
open build/Shutterdrop.appOn first launch the app asks where to save photos, then shows a short setup guide. Allow Local Network access when macOS asks.
Then:
- Pair once: camera on USB in Mass Storage mode → Camera → Pair Camera over USB…
- Shoot: camera on Ctrl w/ Smartphone, Mac on the camera's
DIRECT-…Wi-Fi → Start Live - Import: Mac back on home Wi-Fi → Import Full-Size, camera on Send to Computer
📖 The user guide walks through every step with the exact camera menus, plus troubleshooting.
- Previews are 1616×1080. That's what the camera sends over Wi-Fi while shooting. Full-size files come with the import.
- While shooting, the Mac is on the camera's Wi-Fi, so it has no internet unless it's also on Ethernet.
- Import is slow-ish: about 1 MB/s, roughly 20–30 s per 25 MB ARW. Choose the photos you need.
- Set the camera's clock right. Matching and day folders use the camera's time. Adjust Dates fixes photos taken with a wrong clock in Shutterdrop's library, but not inside the files (EXIF).
Shutterdrop is an independent tool that talks to the camera through interfaces Sony doesn't document for this purpose. Pairing sends a vendor command over USB that registers your Mac on the camera. It worked reliably in testing, but there's no warranty (see the license). Keep your photos backed up, and use a charged battery.
Planned; not built yet.
Wi-Fi previews are capped at 1616×1080. To get the full-size files while you shoot, Shutterdrop will add a third mode that uses a USB cable:
- Set the camera to MENU → Setup → USB Connection → PC Remote and plug it into the Mac.
- Every shot's full-size ARW and/or JPEG lands in Shutterdrop within seconds, straight into the same day folders, with no import step afterwards.
- You choose RAW + JPEG, RAW only or JPEG only, as with imports.
- Shoot with the camera's own shutter button, as with live previews.
How it's expected to work: the A7 III's PC Remote mode speaks PTP over USB
with Sony's extensions. A connection handshake (SDIOConnect) is followed by
a "new object" event (0xC201) for each shot, after which the file can be
downloaded. libgphoto2 documents this for Sony bodies. Shutterdrop's PTP code
already knows these operations and events; what's missing is a USB connection
(it speaks PTP over Wi-Fi today). Testing on the A7 III will confirm the
details.
Want to help, or have an A7 III to test with? Open an issue.
- Full-size tethering over USB (see Coming next)
- Signed, notarized downloads, so you don't have to build it yourself
- Writing corrected dates into the files (EXIF), not just the library
- Open each new shot in Lightroom, Capture One or Preview automatically
- Launch at login, and auto-import whenever the camera starts Send to Computer
- Support for more Sony bodies (A7R III, A9, …) once tested
Shutterdrop speaks the camera's own protocols directly:
- Sony's Camera Remote API for live previews
- PTP/IP, with Sony's extensions, for imports
- A vendor USB command for pairing
docs/how-it-works.md covers the protocol details, what was found testing the A7 III, the project layout and the developer tools.
- sony-pm-alt by falk0069, and Clemens Fruhwirth's reverse-engineering of Sony's USB pairing command
- libgphoto2, for documenting Sony's PTP/IP transfer handshake
Shutterdrop reimplements these protocols in Swift and contains no code from either project.
MIT. Shutterdrop is a free, open-source hobby project: it isn't sold and doesn't make money. Sony, Alpha and related names are trademarks of Sony Group Corporation, used only to say which camera Shutterdrop works with. Shutterdrop is not affiliated with or endorsed by Sony.