Skip to content

About

Parametric 3D CAD generator for steel girder bridges using pythonOCC. Computes section properties, IRC Class A loading, IS 800:2007 design checks, and exports STEP/STL models with an interactive 3D viewer.

Resources

Stars

0 stars

Watchers

0 watching

Forks

Repository files navigation

ParaBridge — Parametric Steel Girder Bridge CAD Model

ParaBridge generates a fully parametric 3D CAD model of a short-span, composite steel-girder bridge with pythonOCC (the Python bindings for OpenCASCADE). A single BridgeConfig dataclass drives every dimension; the script builds the superstructure, substructure and reinforcement, exports the assembly to a STEP file and opens an interactive 3D viewer.

It was developed to meet the design requirements of the FOSSEE Osdag bridge module.

Features

  • Fully parametric geometry — span, girder count and spacing, I-section dimensions, deck thickness, pier and pile sizes, cross-frame count and reinforcement layout are all configuration values; derived quantities (deck width, pier position, pier-cap widths) update automatically.
  • Complete bridge assembly
    • asymmetric steel I-girders (separate top / bottom flange sizes, IS 800 style sections)
    • diagonal X cross-frames between girders
    • RC deck slab built from prism segments
    • hammerhead (trapezoidal) pier caps, circular piers, pile caps and a pile group under each pier (2 × 2 by default, set by n_piles_per_cap)
  • Reinforcement modelling — two-layer orthogonal deck mesh, longitudinal bars in piers, pier caps and pile caps, and circular stirrup rings on the piles (full torus solids, or lightweight edge rings with --lod).
  • Export — STEP (ISO 10303) on every run, optional BREP.
  • Interactive viewer — semi-transparent concrete over opaque steel and rebar so the reinforcement is visible inside the concrete.
  • Command-line overrides for the most common parameters, in millimetres or metres.
  • Test suite covering the configuration logic, every component factory, the full assembly, exports and the CLI.

Tech stack

Python 3.10+, pythonocc-core (OpenCASCADE), PySide6 (viewer backend), pytest.

Project structure

File Purpose
bridge_model.py Main script: BridgeConfig, component factories, assembly, STEP/BREP export, viewer and CLI
draw_i_section.py FOSSEE base primitive for steel I-sections
draw_rectangular_prism.py FOSSEE base primitive for concrete slabs / boxes
tests/test_model.py pytest suite
output/bridge_model.step Sample STEP export of the default bridge (regenerated by every run)
environment.yml, requirements.txt Dependency lists

Setup

pythonocc-core is not published on PyPI, so install it from conda-forge. The provided environment.yml creates a ready-to-use environment:

conda env create -f environment.yml
conda activate parabridge

Or manually:

conda create -n parabridge python=3.10
conda activate parabridge
conda install -c conda-forge pythonocc-core pyside6 numpy pytest

Usage

Build the default bridge, write output/bridge_model.step and open the 3D viewer:

python bridge_model.py

Override parameters from the command line (lengths are in millimetres unless --units m is given):

python bridge_model.py --span 18000 --n-girders 4 --girder-spacing 2800
python bridge_model.py --units m --span 18 --deck-thickness 0.22 --pier-height 4
python bridge_model.py --no-viewer --step-file output/my_bridge.step   # export only
python bridge_model.py --no-rebar --lod                                 # lighter model
Option Meaning
--span Span length
--units {mm,m} Unit of all dimensional options (the model itself is always built in mm)
--n-girders, --girder-spacing Girder count and centre-to-centre spacing
--deck-thickness, --deck-overhang Deck slab thickness and overhang beyond the outer girders
--girder-d, --girder-bf, --girder-tf, --girder-tw Girder depth, flange width, flange thickness, web thickness
--pier-height, --pier-diameter Pier column
--pile-length, --pile-diameter, --n-piles Pile length, diameter and number of piles per pile cap
--n-crossframes Number of cross-frame planes along the span
--no-rebar, --rebar-spacing Hide reinforcement / set longitudinal bar spacing
--concrete-opacity Concrete transparency in the viewer (0 = opaque, 1 = invisible)
--lod Lightweight edge rings for pile stirrups (faster export)
--no-step, --save-brep, --step-file Control the exported files
--no-viewer, --show-axes Viewer behaviour

Run python bridge_model.py --help for the full list. Parameters without a CLI option (pier-cap sizes, pile cap sizes, rebar diameters, cover, …) can be changed on BridgeConfig directly:

import bridge_model as bm

config = bm.BridgeConfig(span_length_L=15000.0, n_girders=4, pier_cap_depth=700.0)
compound, parts = bm.assemble_bridge(config)   # TopoDS_Compound + dict of component lists
bm.export_step(compound, "output/custom.step")

Coordinate system

X is along the span, Y across the deck width, Z is up. The origin is at the span centre on the top surface of the deck slab.

Running the tests

pytest tests/

Notes

  • output/bridge_model.step is a tracked sample; running the script with the default settings overwrites it. Other files in output/ are ignored by git.
  • BridgeConfig(units="m") only records the unit system; dimensional values passed to the dataclass are always millimetres. The CLI performs the metre-to-millimetre conversion.

About

Parametric 3D CAD generator for steel girder bridges using pythonOCC. Computes section properties, IRC Class A loading, IS 800:2007 design checks, and exports STEP/STL models with an interactive 3D viewer.

Resources

Stars

0 stars

Watchers

0 watching

Forks

Releases

Packages

Contributors

Languages